RGB shelf lights

 Hi! At most I don't have much time to post here. But I'm trying))

Here is a combination of my KSN20 RGB controller and shelf light endpoint repeaters.

At first, final result:

RGB controller

 

Hi! I like decoration lights, so RGB controllers are "must have" devices for me =)

I decided to make module system, so for any light power I need only different type of repeaters instead of making new controller board for each purpose.

So this is main RGB controller board designed for my KSN20 CAN network:

UPS for smart home =)

 Hi! During apartment renovation I've routed 12V supply wires to all rooms. For a several years this worked without UPS and everything was fine. Recently I've got used Back-UPS CS 500 and finally decided to upgrade power system.

I have a metal electric route box installed at storage room, but inner size of it is too small to fit UPS. So UPS was disassembled and mounted into this box =)

I've surprised that control board has same mounting hole position as main board, so they perfectly fit together.

On these photos I didn't yet connect AC mains and 12V output wires, just test UPS run on battery.